Bending the profile pipe at an angle without a special tool is not an easy task. Therefore, for this it is better to use a desktop profile bending machine, which is perfect for a home workshop or garage.
Due to its small size, this device does not take up much space on the desktop. At the same time, the self-made profile bending machine copes with its task well.
First of all, it is necessary to cut out three circles from a plate 10 mm thick, in which it is then necessary to drill holes.
Two 4 mm thick plates will also be required. Of these, the master also cuts 2 discs. The central rolling roll of the profile bending machine is assembled from these parts.
The main stages of work
At the next stage, it will be necessary to make a handle (lever). This will require pieces of a thick steel plate, a piece of a round bar, bearings, a long bolt with a nut. All details are collected "to the heap", and the lever turns out.
From the sections of the profile pipe and the pieces of the plate, a "frame" is welded with a guide for the profile. Then the master proceeds to assemble the entire structure: fastens the handle with the rolling roller to the body.
Details on how to make a do-it-yourself desk profilegib for a workshop or garage, you can see in the video on our website. Write in the comments, did you like this homemade product?
