Using a simple and fairly simple to make homemade device, you can quickly and accurately cut ordinary aluminum foil into pieces of the desired size.
For the manufacture of this homemade product you will need plywood, PVC pipe, threaded rod, as well as some other materials. All this can be found without problems in the home workshop and garage.
First of all, the author cuts two pieces of PVC pipe 40 mm in diameter that are identical in length. In addition, you will need to cut four circles from plywood with a diameter of 36 mm and cut off two M10 threaded rods.
In round billets, it is necessary to drill two holes in the center for the diameter of the stud. Then these "plugs" are inserted into the pipe and fixed with screws, and a threaded rod is threaded through them.
The main stages of work
At the next stage of work, it will be necessary to make the base of the structure from pieces of plywood 12-15 mm thick. In the side walls you need to drill two holes for the stud.
After that, rollers from PVC pipes and studs are installed. Moreover, one of the rollers will need to pull the fishing line - it will cut the aluminum foil.
Details on how to make a homemade device for cutting foil into pieces, you can see in the video on our website.
