It is not necessary to use a power tool to process some wood or plywood blanks. Sometimes you can do it manually (especially if there is no electricity in the workshop or garage for some reason).
In this review, we will tell you how to make a simple mechanical mini-grinder with your own hands. For this, no glues or fasteners are required, therefore, everyone can make such a device.
First of all, the master cuts off a piece of the desired width from the factory sanding belt. To do this, he uses a plate on which he puts on a sanding belt, and a construction knife (or you can take a clerical one).
The main stages of work
To make the fixture itself, you need a wooden block. First, the master makes a cut in it on a circular saw, and then draws the contours of the product with a pencil.
At the next stage, the master cuts the workpiece for a mini hand grinder on a band saw, and then polishes the product with sandpaper.
Actually, on this the process of making homemade products can be considered completed. If desired, the product can be soaked with wax or mineral oil, or simply painted with paint.
Then the master puts on the sanding belt (this is done very simply), and you can proceed to the processing of wooden parts.
For details on how to make a mechanical manual mini-grinder with your own hands, we recommend that you look in the video on the site.
