From an old gas cylinder, you can make a simple stove with a frying surface with your own hands, which can be used in the country or next to a private house. When cutting the cylinder, observe safety precautions.
The first step is to unscrew the valve. Then the master cuts off the excess parts from the cylinder in the lower and upper parts.
After that, it will be necessary to cut a rectangular “window” on the side of the gas cylinder, as well as cut a square hole in the upper part (the fire door will be installed here). You can cut both a grinder with a cutting wheel, and a plasma cutter.
The step-by-step process of manufacturing an outdoor stove for a summer residence
At the next stage of work, the cylinder must be burned, and then cleaned with an angle grinder. After that, the master makes a box and a door for the furnace firebox.
From a sheet of metal of suitable thickness, the master cuts out a piece that is welded to the gas cylinder - this will be the frying surface.
Then it remains only to weld the chimney and two handles on the sides, so that the oven can be moved to the right place.
At the last stage, it is necessary to clean the surface of the metal with a grinder well - prepare before painting. The master uses black heat-resistant paint with a matte shade.
The detailed process of manufacturing an outdoor stove with a gas cylinder frying surface can be seen in the video on the website.
