For quick and even laying of sand-cement blocks, the author suggests using a home-made device. For its manufacture, affordable building materials will be required.
In this case, the author uses a profile tube of square section 20 * 20 mm and sheet metal 2 mm thick.
First of all, it will be necessary to cut off the size of the sheet metal blank, as well as two pieces of the profile 370 mm long.
The main stages of work
The author welds two sidewalls from sheet metal to profile pipes. And then the halves are connected to each other with a piece of a profile pipe.
Another sheet metal plate is welded between the two side walls of the fixture at an angle.
At the next stage, the metal will need to be sanded with a grinder with a petal circle and painted.
It is not necessary to paint the walls from the inside, as they will still come into contact with the cement mortar.
Metal strips, which act as limiters, are welded to the bottom of the profile pipes.
A detailed process of manufacturing this device, as well as how to work with it, see the video on our website. Write in the comments what you think about this homemade product.
