WIRE BOWL

Send

To make a bread bowl from wire, you will need:
• soft wire with a core diameter of not more than 1.0 mm. white and brown;
• pliers;
• nippers.
With the help of cutters, 12 identical pieces of white wire of 50 cm are cut. The segments are divided into four bundles of three wires in each. The bundles are folded into a square, as shown in the photo. Next, the brown wire is bent in half and the resulting loop is put on one of the bunches of the base. The loop is tightened, and the working brown ends intersect and capture the next bunch. So the whole square is pulled, then the white wires of the base are moved apart from the beams to the sides and are braided separately. 7 rows are woven with figure eight weaving. To go to work on the walls of the product, the base branches are bent at an obtuse angle to the bottom. Weaving continues for another 4 rows up. Having completed a sufficient height, the remains of the wire are bent and hidden inside, the ends are clamped with pliers. The remaining branches of the base are rounded by an arc and inserted into the base of every second wire. After completing the openwork top, bite off all the sticking ends of the wire.