Share
Pin
Tweet
Send
Share
Send
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall.jpg)
I accidentally saw my metal tubes in a needlework store. For some reason I liked them, although I had absolutely no idea where to apply them.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-2.jpg)
First of all, you need to measure a piece of wire, approximately equal to 70 cm. In its middle you need to pass one tube.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-3.jpg)
Now, on each tail we string one bead.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-4.jpg)
It is better to fix the link in this way.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-5.jpg)
To do this, thread the ends of the wire through the tube to meet each other. The result is this link.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-6.jpg)
For the bracelet on my wrist I had to make 23 links.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-7.jpg)
So that when wearing the wire does not move apart, we hide the remaining ends, passing them along the return route to several links.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-8.jpg)
Well, half of the work is done.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-9.jpg)
Getting to decorating.
To begin with, using pliers on the extreme edges, we fix two rings from a metal chain and a carbine.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-10.jpg)
It is important to pay attention to the position of the hook. So that he does not cause inconvenience, it is better to arrange it like this.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-11.jpg)
We start to braid with tape. To do this, we tie a ribbon in one corner to a regular double knot.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-12.jpg)
Now we pass the tape through the tubes in this way.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-13.jpg)
When I reached the other end, I wrapped two cuts of tape on the end tube and moved in the opposite direction. Having finished the turns, we tie another knot.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-14.jpg)
Around the middle of the bracelet, on one of the tubes we tie a small piece of ribbon with a bow, having previously melted the ends with a lighter.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-15.jpg)
In the end, I got such a little thing.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-16.jpg)
The accessory is ready.
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-17.jpg)
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-18.jpg)
![](http://img.uaft2404.org/img/sdela-2019/braslet-stilnij-metall-19.jpg)
Share
Pin
Tweet
Send
Share
Send