Share
Pin
Tweet
Send
Share
Send
1. We will need:
• Wrapping paper. (Two-tone).
• Double-sided tape.
• Scissors.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi.jpg)
2. We make such patterns. A semicircle is needed to cut the same workpiece. The second is to fold the workpieces into identical cones.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-2.jpg)
3. We cut the blanks, the diameter of one such blank is 9 cm. We need about 50 of them.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-3.jpg)
4. Apply the template-cone in the center of the workpiece.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-4.jpg)
5. First we wrap one corner, and then the second corner.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-5.jpg)
6. Fix with double-sided tape. Set aside without removing the protective film.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-6.jpg)
7. Thus, we make a sufficient number of blanks-cones.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-7.jpg)
8. Remove the protective film and begin to glue the cones together. This should be such a circle.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-8.jpg)
9. We lay the second row of blanks on top. And then until the empty space ends.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-9.jpg)
10. One half of the toy is ready.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-10.jpg)
11. Turn over half the ball and lay the cones on.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-11.jpg)
12. The Christmas tree toy is ready.
![](http://img.uaft2404.org/img/sdela-2019/elochnij-shar-iz-upakovochnoj-bumagi-12.jpg)
Share
Pin
Tweet
Send
Share
Send